Grandstream HandyTone is an “All-In-1” VoIP IAD based on SIPstandard. Built upon Grandstream’s innovative technology，HandyTone features superb. Grandstream HandyTone is a multi-port, all-in-one Analog telephone adapter. It has one RJ11 FXS port(Telephone device), one RJ11 FXO port(Phone line). Grandstream Handytone Setup Guide. Grandstream Handytone ATA; Grandstream Handytone ATA; Grandstream Handytone ATA; Grandstream.
|Country:||Turks & Caicos Islands|
|Published (Last):||21 October 2017|
|PDF File Size:||14.49 Mb|
|ePub File Size:||18.69 Mb|
|Price:||Free* [*Free Regsitration Required]|
Insert a standard RJ11 telephone cable into the LINE port and connect the other end of the telephone cable to a wall jack. Let say, we want to enter for static IP address Find the MAC Address of the device. It is a 12 digits HEX number located on the bottom side of the unit.
Upon rebooting, your phone should have connected to the VoIPtalk service.
Grandstream HandyTone 488 1FXS+1FXO Analog VoIP Router (Discontinued)
The configuration page should appear. Introduction Grandstream HandyTone is a multi-port, all-in-one Analog telephone adapter.
For example IP address: But how to enter the IP addresses? Type the web address into a web browser on a local PC.
Asterisk News Archives older news. Configure your SIP Registration settings as shown below: To test this dial Set Admin Password to a personal value.
HT | Grandstream Networks
When booting the phone for the first time, please allow for minutes booting time as the phone might be automatically downloading and installing a new version of the firmware. You should hear a confirmation message played back to you.
Update the firmware of your Grandstream device to the recommended firmware version. You will see the log in page handyrone the device. How i fix this problems? This value will change the default admin that was used to access the phone menu in step 2 above. Grandstream Handytone Setup Make use of our Grandstream automated grandsttream facility. Select dynamically assigned via DHCP from the items below: The phone’s IP Address should appear on the phone’s screen.
This is not a mandatory step but we do recommend that you change the password.
On the first screenshot of ” Basic Settings look belowyou can change the End user password account: To do this, just enter 12 digits for the new IP address. In order to prevent automatic posting on our website, we kindly request you to type in the number you see in the picture below.
Please disconnect network cable and power cycle haneytone unit before trying to reset the unit to factory defaults. If you are in static IP mode you can change the address. Type in the default handytoen admin and press Login. Dial 02 and you should hear the IP Address.
Check these configuration instructions before continuing. So we have to press: You should see the following login screen: Handytone users Handytone must be plugged into the LAN and connected to an analogue phone press the button on the Handytone, you should hear a menu prompt announcement on your analogue phone.
Insert the power adapter into the HandyTone and connect handyhone to a wall outlet.